Firmware Link — Zte Mf10 Upgrade

Once inside the dashboard, look at the main navigation menu. Click on or Advanced Settings .

Open a web browser and type the default gateway IP address into the address bar: 192.168.0.1 (or check the label on the bottom of the device for a custom IP). zte mf10 upgrade firmware link

Once a valid firmware file (usually named similar to MF10V1.0.0B04.bin ) is obtained, the upgrade procedure is as follows: Once inside the dashboard, look at the main navigation menu

Some MF10 units have a hidden USB mass storage mode. Copy firmware to a USB stick, insert into the MF10’s USB port (if available), and the device will auto-update on next reboot. Consult your specific manual. Once inside the dashboard

Click or Choose File and select the downloaded .bin firmware file. Click Upgrade or Apply .

Один комментарий на “Китайский программатор-отладчик JLINK V9.6 аналог оригинального J-Link BASE (J-Link BASE Compact) от SEGGER Microcontroller”

  1. Из глубокого уважения к трудам ребят из segger, и по причине недоверия чайнам, лично у меня джей-линк фирменный, чего и вам советую.
    У них есть дешевая версия EDU на 60 гринов.

Добавить комментарий