The pod connects to the subwoofer via a .

Verdict & recommendation

: Some users bypass the pod entirely by jumping the power pins and controlling the volume via their PC or an external DAC. Visual Overview of the T3 Control Pod

Remove the rubber feet on the bottom of the control pod to reveal the hidden screws. Unscrew them and separate the plastic housing.

Rotate the wheel very slowly. If the sound jumps sharply up and down or disappears in certain spots, the internal track is worn down and requires replacement. Option 1: The Non-Invasive Fix (Contact Cleaner)

If you use an external DAC or amp, you can bypass the pod entirely.

The GigaWorks T3 uses a specific pin arrangement. To bypass the pod, you must bridge the power pins and route the audio signals. Warning: Proceed at your own risk, as shorting the wrong pins can fry the amplifier board.

Rotate the volume knob back and forth rapidly 30 to 50 times to scrub away oxidation and carbon buildup.