Mikrotik L2tp Server Setup //top\\ Full Jun 2026

Raw L2TP does not provide payload encryption. It only handles the tunneling of packets. To make it secure, we must wrap L2TP inside an IPsec tunnel. MikroTik simplifies this by allowing you to enable IPsec directly within the L2TP server settings. Via WinBox: Inside the menu, click on the Interface tab. Click the L2TP Server button at the top of the window. In the configuration window, adjust the following: Enabled: Check the box.

Now, enable the L2TP server instance and bind it to the profile you just created while enforcing IPsec layer security. While still in the menu, click on the Interface tab. mikrotik l2tp server setup full

The profile defines the DNS, local address, and bridge settings for the tunnel. Go to > Profiles . Click + to add a new profile named l2tp-profile . Raw L2TP does not provide payload encryption

Change DNS Server if necessary (e.g., 8.8.8.8 or your internal DNS). Click and OK . Part 3: Enable L2TP Server Now, we activate the L2TP service on the router. Go to PPP > Interface . Click L2TP Server . Enabled : Check this box. Default Profile : Select l2tp-profile . Authentication : Check mschap2 (recommended). MikroTik simplifies this by allowing you to enable

Check firewall hits:

Next, Alex moved to the menu to build the blueprint for these connections. Under the Profiles tab, he created a new profile named L2TP-Profile . He set the Local Address to the router’s own bridge IP and pointed the Remote Address to his newly created vpn-pool . To keep things secure, he ensured Change TCP MSS was enabled to prevent packet fragmentation issues.