Flash All Bat Xiaomi Link

(though this can vary slightly by device). Do not unplug the phone or close the command prompt under any circumstances. If you encounter an error at this stage, do not panic.

Before using the flash_all.bat script, you must have the following prepared: flash all bat xiaomi link

The script can be run manually or through the Mi Flash Tool . (though this can vary slightly by device)

Rename the folder to something short like C:\rom and try again. 3. Device Stuck on Fastboot Screen after Flashing Before using the flash_all

| Problem | Most Likely Cause | The Solution | | :--- | :--- | :--- | | | The path to the ROM folder contains spaces, or you haven't extracted the ROM correctly. | Ensure you have performed the "double extraction" of the .tgz file. Move the final ROM folder to a simple, short path like D:\XiaomiROM . | | crclist or sparsecrclist error | MiFlash is performing a strict CRC check on the ROM before flashing, usually due to file corruption or incompatibility. | Re-download the ROM from a trusted source. Ensure the downloaded file isn’t corrupted. For advanced users, there are scripts available to bypass these checks, but this is not recommended for beginners. | | flash timeout or write to device failed | This is often due to USB issues, driver problems, or a bad cable. | 1. Reboot your computer. 2. Try a different USB port (prefer a USB 2.0 port directly on the motherboard). 3. Use the original USB cable. 4. Reinstall the fastboot drivers. | | Phone boot-loops or stuck after flash | You likely used flash_all_except_storage.bat to downgrade the OS version, which can cause system partition and user data conflicts. | You need to perform a clean flash. Reboot into fastboot mode and this time run the proper flash_all.bat script. |