Version R12.00.00 is designed to program Motorola’s portfolio of ASTRO 25 mobile and portable radios. It does not program newer APX series radios, which require APX CPS or Radio Management software. Portable Radios
While Mobile Radio CPS (for portables and mobiles) operates on a different version cycle (currently exceeding R20), Infrastructure CPS R12 was pivotal for sites operating on earlier platforms (such as R8, R9, or R10), bridging the gap toward modern standards compliance and enhanced security.
This version does not support the older Jedi series (MTX, MTS 2000) or the consumer-grade MOTOTRBO (DMR) radios. Those require different CPS packages. astro 25 cps version r120000
: A physical USB port or a native RS-232 Serial port depending on your programming ribless cable architecture. Cable Infrastructure
Users should be aware of several critical limitations and risks associated with ASTRO 25 CPS: End of Support Version R12
: 1 GHz Intel Pentium or equivalent AMD processor minimum.
Open Windows Device Manager to verify which COM port the USB-to-Serial driver has mapped to. Match this specific port inside the CPS under Configuration -> Port Setup . Codeplug Version Mismatch This version does not support the older Jedi
If you need to program an Astro 25 radio, understanding the specific requirements of your radio's firmware and the capabilities of your CPS version is the first step to success. Engaging with the knowledgeable communities mentioned above is the best path forward for solving specific technical challenges.