The L3160 will not accept adjustment commands in normal mode. You must force it into :
Inside the Epson L3160 is a physical porous pad called the Waste Ink Pad. Its sole purpose is to absorb excess ink during initialization, borderless printing, and printhead cleaning routines. epson adjustment program l3160
The L3160 uses a pump to pull excess ink through the print head during cleaning cycles. That excess ink is deposited into a spongy absorbent pad at the bottom of the printer. Epson programs the printer to count every drop of ink that goes into this pad. Once the counter hits a preset limit (usually around 15,000 to 20,000 pages), the printer hard-locks itself. The L3160 will not accept adjustment commands in normal mode
: Slide the edge guides against the paper. Ensure the stack is under the arrow mark on the guides to avoid "Paper Source Invalid" errors. 2. Software Paper Settings (Adjustment Program) If you are using the Epson Adjustment Program (Resetter) The L3160 uses a pump to pull excess
The software version is for a different printer model (e.g., L3110 or L3150).