Once complete, a pop-up window will read "Upgrade Success" or "Finished." The Satlink WS-6906 will automatically reboot. Troubleshooting Common Upgrade Issues
If you are using a USB-to-Serial adapter, install its drivers on your PC before connecting it. Ensure you know which COM port it is assigned to (check Device Manager in Windows). satlink ws6906 software upgrade
If you attempt to flash the wrong firmware onto your WS6906, you risk permanently bricking your device. Users have reported that after an incompatible upgrade, their Satlink meter becomes locked and will no longer receive any scan signal. One eBay reviewer warned: “After an upgrade your newer Satlink model will be locked always without receiving any scan signal nomore!” Once complete, a pop-up window will read "Upgrade
This is the most feared outcome. Many users have reported that after a firmware update, their SATLINK WS6906 refuses to boot at all. One forum user described the situation dramatically: “nach einem FW update möchte mein Satfinder nicht mehr booten … als Briefbeschwerer sieht der WS-6906 nicht wirklich schick aus” (after a firmware update, my satfinder no longer wants to boot … as a paperweight, the WS-6906 doesn’t look really chic). If you attempt to flash the wrong firmware
Connect the 3.5mm mini-jack end of the upgrade cable into the data port located on the side of the meter. Plug the RS232 serial end into your USB-to-Serial adapter. Insert the adapter into an open USB port on your computer.
