If your server boots up but cannot be found, ensure the ethernet cable is securely plugged into the primary network port ( eth0 ). On motherboards with multiple ethernet ports, Unraid may default to a different port than the one you were previously using. Try swapping the cable to a different port.
To reset your Unraid network settings to the install defaults (DHCP), you must remove the specific configuration files from your Unraid flash drive. This process is useful if you have lost access to the WebGUI due to a manual IP error or incorrect bonding/bridging setup. Method 1: Using Another Computer (Easiest) unraid reset network settings install
USE_DHCP="no" IPADDR="192.168.1.150" NETMASK="255.255.255.0" GATEWAY="192.168.1.1" Use code with caution. Step 3: Save and Reboot If your server boots up but cannot be
It will default to using your primary motherboard ethernet port ( eth0 ). Finding Your Server's New IP Address To reset your Unraid network settings to the
How to Reset Network Settings on an Unraid Install Mconfigured network settings can completely lock you out of your Unraid server dashboard. Whether you just changed routers, messed up a VLAN configuration, or assigned a broken static IP, losing access to the web GUI is frustrating.
: Any custom static IP you previously set will be lost.