//free\\ — Zte F670 Manual

Enter the Name, Protocol (TCP/UDP), and the Local IP of your device. Input the Start and End ports provided by your application. Parental Controls Navigate to > Parental Control .

Adjust the and DHCP End IP ranges accordingly. zte f670 manual

The ZTE F670 is a Dual-Band Gigabit ONT, meaning it supports both 2.4 GHz and 5 GHz Wi-Fi frequencies for faster, more stable internet. GPON (Gigabit Passive Optical Network) Wi-Fi Standard: IEEE 802.11ac dual-band (2.4GHz & 5GHz) Ethernet Ports: 4 x 10/100/1000 Mbps RJ-45 LAN ports VoIP Ports: 1 or 2 x FXS ports for VoIP service USB Port: 1 x USB 2.0 (for file sharing/storage) Antennas: Internal or external high-gain antennas 2. Installation and Hardware Setup (ZTE F670 Manual) Enter the Name, Protocol (TCP/UDP), and the Local

If your ISP requires you to set up a username and password for internet access: Navigate to > WAN > WAN Connection . Select Create New Connection . Set the connection type to IP Route . Select the appropriate WAN mode (e.g., PPPoE). Enter the Username and Password provided by your ISP. Enable VLAN if required and enter the VLAN ID . Click Create/Apply . 6. Troubleshooting and Support Adjust the and DHCP End IP ranges accordingly

Change the (e.g., change 192.168.1.1 to 192.168.2.1 ).

Click . Note that you will need to log back into the gateway using your newly assigned IP. 6. How to Factory Reset the ZTE F670