Before applying power to a freshly flashed board, verify whether your screen panel requires 3.3V, 5V, or 12V . Check the onboard jumper selector position. Sending 12V down a 3.3V LVDS logic channel will permanently burn the panel's timing controller (T-CON) chip.
Before applying power to a freshly flashed board, verify whether your screen panel requires 3.3V, 5V, or 12V . Check the onboard jumper selector position. Sending 12V down a 3.3V LVDS logic channel will permanently burn the panel's timing controller (T-CON) chip.